I’m working on a mechanical engineering project and need support to help me study.

ME 371 Term Project (Group A)Project DescriptionConsider a steam power plant which operates on the simple ideal Rankine cycle (shown inthe next page), with the following conditions:• The boiler pressure is 2.5 MPa• The condenser saturation temperature is 90°C• The steam temperature at the exit of the boiler is 450°C• Water leaves the condenser as a saturated liquid• The mass flow rate through each component is 20 kg/s• The isentropic efficiency of the pump and the turbine are 100% and 90%,respectively• Energy is supplied to the boiler by combustion gases that come from a furnace. Thegases enter the boiler at 1027°C and leave at 427°C. The combustion gases can betreated like “air”.• The condenser rejects heat to a river. The river water enters the condenser at 18°Cand leaves at 50°C. The specific heat of the river water can be taken as 4.18 kJ/kg.K.Calculate the following:1. The power output of the steam power plant2. The thermal efficiency of the steam power plant3. The mass flow rate of combustion gases from the furnace4. The mass flow rate of the river water5. The rate of entropy generation in each of the four components. Explain thedifferences in entropy generation rates.Report OrganizationThe report should include, at least, the following:• Appropriate title• Abstract• Introduction and objectives• Analysis• Calculations• Results• Discussion• Conclusions• References